RadioBridge LoRaWAN sensors initialize with a join process that scans though each sub-band until a join request is successful. The joined sub-band is then remembered by the sensor and will be the first sub-band attempted if the sensor needs to ...
The recommended way to send a downlink is to use the RadioBridge Console API which uses a simple POST request. From there you can use the uplink and downlink APIs described in the RadioBridge API Documentation. To access the API section of the ...
Device EUI This is the ID on the label located on the sensor itself. The barcode provided can also be used to read the Device EUI. Application EUI By default this is set to: 0101010101010101. This can be customized in the factory for production ...
In general, even if more than one Gateway receives a signal from a given Sensor, the Network Server will automatically eliminate duplicate packets. Multiple Gateways should not present concerns provided the devices have been provisioned to only one ...
The RadioBridge RBS101 (SigFox) and RBS301 (LoRaWAN) Sensor families all use a single CR123 / CR123A (CR17345) Lithium Battery. Rechargeable lithium batteries are not suitable for this application. Use only non-rechargeable lithium batteries. ...