Where Can I find the AppEUI/JoinEUI?

• Related Articles

• Where can I find the default Device EUI, App EUI and App Key for LoRaWAN sensors?

  Device EUI This is the ID on the label located on the sensor itself.  The barcode provided can also be used to read the Device EUI. Application EUI  By default this is set to: 0101010101010101.  This can be customized in the factory for production ...

• The user guide mentions a published SubGig spec. Where do I find that?

  The SubGig specification has not yet been published, however a brief description of the topology is given in the user guide.

• Is there a default PK that comes in all modules from the factory or how do I find out what it is?

  The provisioning key is not set by Radio Bridge, it is a write-only field that is set by the client prior to deployment into the field. The session key itself could be programmed into every device and the provisioning key would not be necessary. The ...

• My sensors join but keep rejoining

  ​If you find that your sensors initially join but keep rejoining, set the sever to max DR3 unless you have a 64-channel gateway. 

• Since the PL command accepts a 32-bit value, is the permissible value for that command 0x00000000 to 0xFFFFFFFF?

  Yes but note that the power level parameter is a signed value because it represents units in dBm (actually deci-dBm or dBm/10). So for instance, to set a power level of -10 dBm one would write FFFFFF9C (-100 in hex). If this parameter is used, the ...