What kind of replacement battery should I use for RadioBridge RBS101 and RBS301 Sensors?

What kind of replacement battery should I use for RadioBridge RBS101 and RBS301 Sensors?

The RadioBridge RBS101 (SigFox) and RBS301 (LoRaWAN) Sensor families all use a single CR123 / CR123A (CR17345) Lithium Battery. 
Rechargeable lithium batteries are not suitable for this application. Use only non-rechargeable lithium batteries.
Panasonic CR123A Industrial Lithium Battery

    • Related Articles

    • How do I know when to change the battery?

      RadioBrdige Sensors are designed to provide several years of useful life before the battery needs to be changed.  The effective life of the battery is dependent on many factors such as message volume, ambient temperature, signal strength and Adaptive ...
    • Decoding battery information from the supervisory message

      The RadioBridge Sensors use a 3V battery which measures about 3.2 volts when freshly installed. Once the battery depletes to 2.5V the sensor will cease to function. The Supervisory Message periodically sent from the sensor uses the last byte to ...
    • What is the procedure for sending downlink messages to sensors?

      The recommended way to send a downlink is to use the RadioBridge Console API which uses a simple POST request.  From there you can use the uplink and downlink APIs described in the RadioBridge API Documentation.  To access the API section of the ...
    • Where can I find the default Device EUI, App EUI and App Key for LoRaWAN sensors?

      Device EUI This is the ID on the label located on the sensor itself.  The barcode provided can also be used to read the Device EUI. Application EUI  By default this is set to: 0101010101010101.  This can be customized in the factory for production ...
    • "Device ID Already In Use" Error

      Please contact us if this error is encountered when attempting to add sensors to the RadioBridge Console.