Where can I find the default Device EUI, App EUI and App Key for LoRaWAN sensors?

Where can I find the default Device EUI, App EUI and App Key for LoRaWAN sensors?

Device EUI
This is the ID on the label located on the sensor itself. 
The barcode provided can also be used to read the Device EUI.

Application EUI 
By default this is set to: 0101010101010101
This can be customized in the factory for production orders, but most customers simply use this default.

Application Key 
This is the Key on the label located on the sensor itself. 
The barcode provided can also be used to read the Application Key.

For more information on how to connect LoRaWAN sensors, refer to section 4.1 of this document:


    • Related Articles

    • Is there a default PK that comes in all modules from the factory or how do I find out what it is?

      The provisioning key is not set by Radio Bridge, it is a write-only field that is set by the client prior to deployment into the field. The session key itself could be programmed into every device and the provisioning key would not be necessary. The ...
    • How does my LoRaWAN Gateway access the network?

      LoRaWAN gateways may be connected via wired ethernet, cellular, wifi or even satellite depending on the brand and model of your gateway. Regardless of your application, multiple solutions are available to get your sensors on the cloud. It is also ...
    • How does the LoRaWAN join process work?

      RadioBridge LoRaWAN sensors initialize with a join process that scans though each sub-band until a join request is successful.  The joined sub-band is then remembered by the sensor and will be the first sub-band attempted if the sensor needs to ...
    • Where can I obtain a LoRaWAN-compliant Gateway?

      RadioBridge sensors will work with any LoRaWAN compliant gateway such as MultiTech or Comcast machineQ: https://www.multitech.com/brands/multiconnect-conduit https://store.machineq.com/ Once the gateway is up and running, simply register the sensor ...
    • What is the procedure for sending downlink messages to sensors?

      The recommended way to send a downlink is to use the RadioBridge Console API which uses a simple POST request.  From there you can use the uplink and downlink APIs described in the RadioBridge API Documentation.  To access the API section of the ...