Why did my sensor come with a magnet?

Why did my sensor come with a magnet?

Nearly all RadioBridge Sensors come packaged with a mountable magnet.

For Door/Window Sensors the magnet and sensor can be mounted to the door (or window sash, enclosure lid, etc.)  and frame.  When the door is opened and the sensor and magnet become separated a "door open" event is generated.  When the door is closed and the sensor and magnet come together a "door closed" event is sent.  The magnet should align with the triangle-shaped impression on the sensor's case for correct installation.

Sensors such as motion, tilt, temperature and contact sensors also include a magnet, however it is supplied only for testing purposes.  When the magnet is touched to the triangle-shaped impression on the side of the case, these sensors will generate a "test message" event which is useful for diagnostic and setup purposes.  Sensors that are not Door/Window Sensors do not need to have the magnet installed for normal use of the sensor.

See Also:

    • Related Articles

    • How do I decode a Door/Window Sensor event?

      The Door/Window Sensor will generate events when a door (or window) is open or closed.   Byte 0: 7-4 Byte 0: 3-0 Byte 1 Byte 3 Protocol version (4 bits) Counter (4 bits) Message Type Code (0x03) Event (0x01 in the example below)     Protocol ...
    • How do I decode a Dry Contact Sensor Event?

      The wireless Dry Contact Sensor detects a connection between two wires. When the wires are either shorted or opened, the Dry Contact Sensor will generate an event.   Byte 0: 7-4 Byte 0: 3-0 Byte 1 Byte 2    Protocol version     (4 bits) Counter       ...
    • How Do I decode an Ultrasonic Level Sensor Event?

      The Ultrasonic Level Sensor will generate events if the measured distance rises above or falls below the configured thresholds.   Byte 0: 7-4 Byte 0: 3-0 Byte 1 Byte 2    Byte 3 and 4 Protocol version (4 bits) Counter (4 bits) Message Type Code 0x10 ...
    • How do I decode a Water Rope Sensor Event?

      The Water Rope Sensor will generate events when the presence of water or another liquid is detected   Byte 0: 7-4 Byte 0: 3-0 Byte 1 Byte 2    Byte 3 Protocol version     (4 bits) Counter       (4 bits) Message Type Code     (0x08) Water Rope Sensor ...
    • How Do I Decode A High Precision Tilt Sensor Event?

      The High Precision Tilt Sensor will generate events if when the sensor is tilted either away from or toward the vertical orientation by a specified amount.   Byte 0: 7-4 Byte 0: 3-0 Byte 1 Byte 2    Byte 3 Byte 4 Byte 5 Protocol version     (4 bits) ...